Flex-3000 (3k) ONLY
60m table data found in database files:

Folder location:   %userprofile%\AppData\Roaming\FlexRadio Systems\PowerSDR v2.8.0\

You should have these <Key>'s in your database. The actual values inside may differ from my values, but you can probably use these values, if your missing some values.


<State>
    <Key>power_table[3]</Key>
   <Value>0.0200|0.0258|0.0369|0.0493|0.0658|0.0760|0.0908|0.1015|0.1114|0.1209|0.1322|0.1446|0.1586</Value>
  </State>

<State>
    <Key>pa_bias_table[3]</Key>
    <Value>0|0|0|0|0|0|0|0</Value>
  </State>

<State>
    <Key>rx1_level_table[3]</Key>
    <Value>-71.474|8.988|1.420</Value>
  </State>
<State>
    <Key>rx2_level_table[3]</Key>
     <Value>-59.200|-13.500|-32.000</Value>
  </State>

<State>
    <Key>pa_bridge_table[3]</Key>
     <Value>0.1007|0.1605|0.2887|0.4480|0.6757|1.5033</Value>
  </State>

 <State>
    <Key>swr_table[3]</Key>
  <Value>1.0395</Value>
  </State>

<State>
    <Key>atu_swr_table[3]</Key>
    <Value>1.0058</Value>
  </State>

 <State>
    <Key>rx1_preamp_offset[3]</Key>
    <Value>1.420</Value>
  </State>